video corpo

CONVEX MST18240
12Pages

{{requestButtons}}

Catalog excerpts

CONVEX MST18240 - 1

CONVEX MST18240 UNDERWATER LIGHT Operating Instructions

Open the catalog to page 1
CONVEX MST18240 - 3

PREFACE PRECAUTIONS The CONVEX series underwater lights are designed to use the latest LED lighting technology. The surface-mount designed casings enable very simple installation on the hull without making any bigger holes through the hull under water line. All the models are available in aluminium bronze and anodized aluminium casings in different colors. The lighting is available in white, blue or green colors or three-color. All the models are designed with 18 power LEDs and suitable power supply units. FEATURES Aluminium Bronze or Anodized Aluminium Casing 18 Power LEDs Design White,...

Open the catalog to page 3
CONVEX MST18240 - 4

CONTROLS AND CONNECTORS Underwater Light CONVEX MST18240 3 2 4 1 (1) Optical window The 6 mm depth tempered glass optical window. (2) Underwater light casing Aluminium bronze or anodized aluminium casing with fixing holes and cable gland. (3) Cable The 8-pole multi-core cable to connect the power supply unit. (4) Fixing screw The fixing screws to fix the underwater light on the hull. 4

Open the catalog to page 4
CONVEX MST18240 - 6

INSTALLATION The underwater light kit consists of the following components: Underwater Light CONVEX MST18240 Power Supply Unit MPS06800 3 x fixing screw 5.5x38 2 x cable gland M12 Operating Instructions with Declaration of Conformity and Warranty conditions Underwater Light CONVEX MST18240 The CONVEX MST18240 has to be installed on a flat surface on the stern of the hull of the vessel. Do not try to install the underwater light while the vessel is in the water. When the installation is finished briefly test the underwater light prior to launching the vessel. The installation have to be...

Open the catalog to page 6
CONVEX MST18240 - 7

Note: All the stainless steel fixing screws it is highly recommended to be sealed in the contact with underwater light casing by optional TEF-GELTM waterproof paste (not included) to prevent galvanic corrosion. To install the underwater light on the steel hull it is highly recommended to use the optional isolation board (not included) between the hull and underwater light casing to prevent galvanic corrosion. Note: Do not overtighten the screws as this can result in hull or underwater light damage. Bonding The underwater light has to be connected to the vessels bonding and cathodic...

Open the catalog to page 7
CONVEX MST18240 - 8

Note: The main DC power supply of the vessel has to be switched off before installation. Power supply connection The power supply has to be connected through the switch (not included) and protected by a fuse (not included) to the DC IN terminal-block connector with correct polarity. The power supply voltage has to be from 10 - 30Vdc. A power supply unit of another underwater light can be connected to the DC OUT terminal-block connector. Note: Only one additional power supply unit of the same model number can be connected to the DC OUT terminal-block connector and suitable power supply cable...

Open the catalog to page 8
CONVEX MST18240 - 9

APPEARANCE 6 16 Ø 34 TECHNICAL SPECIFICATIONS LED Underwater Light CONVEX MST18240 Power requirement 3x800 mA Lens angle 50° Optical window 6 mm depth tempered glass Luminous flux 3.900 lm White color temperature 10.000 K Operating temperature -10C - +50C Casing Aluminium bronze (AB2) or anodized aluminium Protection IP 68 Dimensions Ø166x34mm Weight 2.7 kg (bronze) / 1.1 kg (aluminium) Power Supply Unit MPS06800 Input voltage Consumption Operating temperature Casing Protection Dimensions Weight 12-24 Vdc max. 5.4 Adc/12 Vdc or 2.5 Adc/24 Vdc -10C - +50C Polycarbonate IP 65 200x160x55.5mm...

Open the catalog to page 9
CONVEX MST18240 - 10

WARRANTY 1. The equipment manufactured by ASTEL d.o.o. is warranted to be free from defects in workmanship and materials under normal use and service. 2. This Warranty is in effect for of two years from the date of purchase by the user. Proof of purchase must be included, to establish that it is inside the warranty period. 3. This Warranty is transferrable and covers the product for the specified time period. 4. In case any part od the equipment proves to be defective, other than those parts excluded in paragraph 5 below, the owner should do the following: (a) prepare a detailed written...

Open the catalog to page 10
CONVEX MST18240 - 11

DECLARATION OF CONFORMITY according to IEC Guide 22 and EN 45014 Manufacturer's Name: ASTEL, Podjetje za projektiranje, proizvodnjo in trgovino, d.o.o. Manufacturer's Address: Dutovlje 138 6221 Dutovlje Slovenija declares that the products Item, Product Name and Model Number: 1. Underwater Light CONVEX MST18240 with Power Supply Unit MPS06800 conform to the following Product Specifications: EMC: EN 55022 (CISPR 22: 1993) EN 50130-4: 1994 Safety: EN 60950 EN 60529 Supplementary Information: The products herewith comply with the requirements of the following Directives and carry the CEmarking...

Open the catalog to page 11

All ASTEL MARINE catalogs and brochures

  1. CONVEX MSR0680

    12 Pages

  2. CONUS MSR0680

    12 Pages

  3. CONUS MST18240

    12 Pages

  4. ARCUS MRM01

    12 Pages

  5. CONUS MSR18240

    12 Pages

  6. PLAQUE MFM0680

    12 Pages

  7. CONVEX MST0680

    12 Pages

  8. CONUS MST0680

    12 Pages

Archived catalogs

  1. Brochure 2013

    21 Pages

  2. CONVEX MTH0680

    12 Pages