Vertical_Mainsail_Furler - 20 Pages

Add to MyNauticExpo favorites
Vertical_Mainsail_Furler

Catalog excerpts

VERTICAL MAINSAIL FURLER Bamar offers a wide range of mainsail furlers to be fitted externally onto the mast and mechanisms to be housed inside masts with special section for vertical mainsail furler. These systems are available in manual, electric and hydraulic versions.

 Open the catalog to page 1

EXTERNAL MAINSAIL FURLER When installing an external mainsail furler, you do not have to replace the existing mast and boom. The equipment is designed and built in order to adapt to any structure (the system may be installed on both aluminium and wooden masts). The external foils to be fitted to the mast are 2.5 m long (6 m for type E) and have an integrated groove that may be used to hoist a traditional mainsail in case of emergency. The groove supports both hooks and luff tape. The foils are to be installed on aluminium masts with the rivets supplied. Should you have a wooden mast, the...

 Open the catalog to page 3

(A10) Manual external mainsail furler “RGEM” This system is the forerunner of all vertical furling systems on the market. It has started the fashion of vertical external mainsail furlers. It is characterized by the famous “worm screw” coil drive that grants a correct stowage of the furling line avoiding all possible overlaps while furling. The coil drive is made of silver anodised aluminium, and integrates a ball bearing bush protected by seals and OR. Watertight halyard swivel Another important mechanical component is the halyard swivel that connects the halyard to the sail. It is made of...

 Open the catalog to page 4

Codes to order “RGEM” RGEM Model Max E m * Max P 8.0 10.5 Max P 13.0 Max P 15.5 Max P 18.0 Max P 20.5 Max P 24.0 Max P Max P 30.0 BA70 3.2* 101001020300 101001030400 101001040500 m m m m m m m m BA80 4.2* 101002020300 101002030400 101002040500 101002050600 C 5.7* D 6.7* 101003030400 101003040500 101003050600 101003060700 E 10.0* 101004040500 101004050600 101004060700 101004070800 101005060700 101005091200 101005111400 *Data expressed are indicative and need to be checked with the sail-maker depending on the cut, cloth and thickness of the sail. (A14) Extra colour RGEM Model Black anodising...

 Open the catalog to page 5

(A12) Electric external mainsail furler “RGEEL” Thanks to the attention given both to technical developments and to the always evolving requirements of customers, Bamar presents an external electric mainsail furler to be fitted onto the existing mast. It is supplied with a motorization that replaces the classic manual “worm screw” coil drive. This solution allows you to reef, furl and unfurl the sail by simply pushing a button from the cockpit. Both the external foils that stow the sail and the internal ones on which the sail furls are the same than the ones used on the manual system...

 Open the catalog to page 6

HOW TO ORDER THE MAINSAIL FURLER “RGEEL”: • • • • • Choose the mechanism depending on P and E measurements. Check the boat voltage. Choose the accessories to complete the system. Specify the diameter of the boom goose-neck pin to fit the existing boom toggle (see dimensioning table). Check there is enough room for the motorization under the boom. In the following table you will find the codes that help you place the order: RGEEL model Motorization mod. Max E m * 8.0 m 12V 24V BA80 80 4.2* 101202020301 101202020302 Max P 10.5 m 12V 24V 101202030401 101202030402 101203030401 101203030402 Max...

 Open the catalog to page 7

(A20) Manual in-mast mainsail furler “RGIM” Mainsail furling mechanism to be fitted inside mast foils with special section for vertical internal mainsail furler. It is characterised by the famous “worm screw” coil drive that grants a correct stowage of the sail furling line, avoiding all possible overlaps while furling. The coil drive is made of silver anodised aluminium, and integrates a ball bearing bush protected by seals and OR. Another important mechanical component is the halyard swivel that connects the halyard to the sail head. It is made of silver anodised aluminium, and rotates on...

 Open the catalog to page 8

(A22) Electric in-mast mainsail furler “RGIEL” Mainsail furling mechanism to be fitted inside mast foils with special section for vertical internal mainsail furler. It is supplied with a motorization that replaces the manual “worm screw” coil drive. This solution allows you to reef, furl and unfurl the mainsail by pushing a switch from the cockpit. For any information on the electric motorization, please refer to page 14. The electric in-mast mainsail furler kit is delivered in a strong 2,600 mm long hard board box and includes: • furling foils and connectors • halyard swivel • terminal...

 Open the catalog to page 9

Electric motorization for existing mainsail furlers Bamar presents a range of motorizations that may replace the manual mechanisms on in-mast and external mainsail furlers made by Bamar and any other brand. For information on the electric motorization, please refer to page 14. The electric mainsail motorization kit is made up by: • electric motorization • anchoring plate (only for Bamar models) • electric accessories (please refer to section “Electric Accessories” Product Groups B40 - B41, “Foresail Furler” brochure). Please, check furling mast sections on page 18. (A25) Motorization for...

 Open the catalog to page 10

(A35) Motorization for in-mast mainsail furler of different brands “RRGIEL” Bamar supplies mainsail motorizations to be fitted inside new-built and/or existing furling masts. The system may be fitted both on existing Bamar masts, and on masts of different brands, thanks to an application that allows you to customize fittings depending on the mast to be motorized. The kit includes: • electric motorization Please, check furling mast • anti-rotation bush sections on page 14. • threaded flange • inner foil adapter • front cover (depending on models) • electric accessories (please refer to...

 Open the catalog to page 11

Grand Prix Line G L F H øO N E M øA øB D C Mast section SPARCRAFT 15083 SPARCRAFT 17884 SPARCRAFT 22012 SPARCRAFT 24311 SPARCRAFT 26711 mm ø A mm * ø B min mm C mm D mm E mm F mm G mm H mm L mm M mm N mm ø O Motorization Kg RRGIEL model 130 160 101329170022 101329180022 101329190022 101330200022 101330210022 101330220022 130 160 170/140** 200/170** 140 170 33 33 330 355 450 520 84 * 780 875 110 130 220 200 50 50 =øB =øB 35 55 24V 24V 24V 24V 24V * To be customized ** If fitted on front cover Mast section ZSPARS ORIGINAL CONNECTION Z SPARS Z 600E SAIL VELA MURATACK Z SPARS Z 700E CONNECTION...

 Open the catalog to page 12

All ARTE - BAMAR catalogs and brochures

  1. EJF 1 - 2

    40 Pages

  2. BHP

    36 Pages

  3. BFBMHSS

    20 Pages

  4. BFBMESS

    28 Pages

  5. BCWH

    36 Pages

  6. BCWE

    32 Pages

  7. RGFI

    1 Pages

  8. GFI

    3 Pages

  9. EJF

    1 Pages

  10. Appendix

    16 Pages

  11. Captive_Winches

    16 Pages

  12. Deck_Equipment

    16 Pages

  13. RLG-CODE

    24 Pages

  14. Foresail_Furler

    40 Pages

Archived catalogs

  1. Bamar Catalogue

    137 Pages