Captive_Winches
16Pages

Sailing Hardware Bamar presents two ranges of technologically advanced Captive Winches, destined to sailing yachts from 15 to over 75 m: “Performance” series, new line with front line exit, characterized by reduced weights and dimensions; “Classic” series with lateral exit ELECTRIC OR HYDRAULIC CAPTIVE WINCHES

(P01-P31) 1T AND 2T ELECTRIC “BCWE” AND HYDRAULIC “BCWH” CAPTIVE WINCHES “PERFORMANCE” SERIES Bamar introduces on the market a new line of line stowing devices for the control of sheets and halyards, now available for sailing yachts from 45’ to 65’ with dynamic load from 1000 to 2000 kg. These systems are characterized by low weight and reduced overall dimensions. They are supplied with a manual emergency clutch (available only on electric models), working load electronic control, slack sheet sensor, stroke end sensors. Moreover, they may be equipped with pulleys and deck organizers for the...

Technical data “ELECTRIC” CAPTIVE WINCH Max dynamic pull Max static pull Max line diameter Line stowing capacity Line speed Weight Electric motor power Electric supply Nominal absorption Duty Code Kg Kg mm m m/min Kg Watt V Amp S2 - min BCWE 1 Medium 1000 2000 10 24 15 65 1500 24 75 15 121101210224 BCWE 2 Small 2000 4000 12 25 15 95 2000 24 100 15 121102112225 BCWE 2 Medium 2000 4000 12 30 15 100 2000 24 100 15 121102212230 Kg Kg mm m m/min Kg Bar Bar l/min BCWH 1 Medium 1000 2000 10 24 18 65 100 140 25 121201210024 BCWH 2 Small 2000 4000 12 25 10 95 100 140 25 121202112025 BCWH 2 Medium...

(P01-P31) 5T E AND 9T ELECTRIC “BCWE” AND HYDRAULIC “BCWH” CAPTIVE WINCHES, “PERFORMANCE” SERIES Innovative line stowing device for sheets and halyards, with 5 & 9 Ton dynamic pull. Main characteristics of this new line of BCWE and BCWH Captive Winches are: -- BCWH, power supplied by electric-hydraulic power-pack -- BCWE, 380-400 volt electric supply and automatic speed control in relation to pull load -- Safety: • Mechanical control system (patent pending) preventing the sheet from slackening when easing away • Line always accompanied when furling in, thanks to the drum crests that guide...

Technical data “ELECTRIC” CAPTIVE WINCH Max dynamic pull Max static pull Max line diameter Line stowing capacity Line speed Weight Electric motor power Electric supply (trifase three-phase) Intermittent service Code T T mm m m/min Kg KW V BCWE 5 Small 4-5 8 16 40 15 275 6-8 380 - 400 BCWE 5 Medium BCWE 9 Small BCWE 9 Medium 4-5 8-9 8-9 8 15 15 16 20 20 50 48 62 15 15 15 290 390 410 6-8 8 - 13 8 - 13 380 - 400 380 - 400 380 - 400 to be confirmed depending on applications 121105216352 121109120345 121109220355 121105116340 BCWEs are supplied with electric panel “HYDRAULIC” CAPTIVE WINCH Max...

CAPTIVE WINCHES “CLASSIC” SERIES Quality and technological innovation are the key points upon which Bamar products manufacturing process is based. Bamar engineering department developed the highly technological design of Captive Winches, using materials and mechanical solutions that may prevent any possible unexpected event while sailing. Moreover, we cooperated with a team of engineers who designed and checked critical points and most stressed parts on prototypes by carrying out Final Elements Analysis (FEA) and tests on test benches. Captive Winches are manufactured in Bamar workshop....

Aluminium parts are made of high resistance aluminium alloy class 6000 thermically treated T6. After that, they are treated with hardcote anodising. Transmission shafts are made of marine grade stainless steel. BCW’s are equipped with either belt, chain, or bevel drive. They are also equipped with high efficiency Epicyclic reduction gears. Mechanisms may be either hydraulically or electrically motorized. For the electric version, voltage is 220-380V for the entire range, apart from BCW4 models, which require a 24 Volt electric supply. We use fixed speed motors (variable speed available on...

Rope outlet from bcw and extra pulleys EASE 6 8 BASEPLATE 1 SCOTTA SHEET 0° 2 RH SIDE 15 6 RH SIDE 3 LH SIDE A 0° B LH SIDE 15 LEFT HAND SIDE SOLUTION VERTICAL BULKHEAD 60° 60° C 3 DECK RH SIDE D 7 RIGHT HAND SIDE SOLUTION 7 LH SIDE B 1 2 3 4 5 6 7 8 4 Description Vertical pulley for LH BCW Horizontal pulley for LH BCW (included) Extra horizontal pulley (optional) Vertical pulley for RH BCW Horizontal pulley for RH BCW (included) Extra horizontal pulley (optional) Extra vertical pulley (optional) Spacer A B C D 5 Vertical pulley hub for RH BCW Horizontal pulley housing for RH BCW Vertical...

FIXED DISPLACEMENT HYDRAULIC CAPTIVE WINCHES OPTION A Captive winch model Max dynamic pull Max static pull Drum diameter Line diameter Line speed with oil flow “1” Line speed with oil flow “2” Pressure needed for max dynamic pull Max pressure Oil flow option “1” Oil flow option “2” Fixed displacement motor Weight (N) (N) mm mm m/min. m/min. bar bar l/min. l/min. Kg BCWH 4 40,000 50,000 220 10-18 10.5 21.0 233 250 20 40 A2FM10 230 BCWH 8 80,000 100,000 300 16-24 7.0 14.0 220 250 30 60 A2FM23 400 BCWH 16 160,000 200,000 400 20-32 5.0 10.0 226 250 40 80 A2FM56 760 BCWH 24 240,000 300,000 500...

(P45) Accessories for “BCWH” and “BCWE” S.S. THROUGH-DECK FITTING FOR LINE PASSAGE Flush deck through-deck fitting for the passage of sheets and halyards. It reduces weights and overall dimensions above deck, as it does not require the use of pay off pulleys. Moreover, it reduces the passage of water below deck, thanks both to the seal used and to the hole adapted to line diameter. Ideal for all running rigging stowed below deck. 48 7 44 65 CH 36 Product Code 80100158 80100159 80100160 Cantieri Se.Ri.GI di Aquileia Spa - Foto di Mario Cipollini S.s. through-deck fitting for ø 10 mm line BCW...

PRIVACY INFORMATION ACCORDING TO ART.13 DECREE N.196 OF 30.06.2003 Dear Client / Supplier, Pursuant to the provisions contained in article 13 of the Legislative Decree 196 of 30th June 2003 on the protection of personal information, A.R.TE. srl, affirms that all personal information on clients, suppliers or third parties in general, however obtained or held, acquired during the execution of its business, will be treated in a correct, lawful and transparent manner, respecting the laws of privacy of each: A1) Data are collected for the following purposes: • Either the fulfilment of...