m. Altitude Sector: The altitude sector when the dive started. n. Ascent Rate Indicator: The fastest ascent speed recorded during the dive. If the maximum ascent rate was exceeded during the dive, the uwn indicator will also appear. Logbook Page 2 {seefigure 9) O. Water temperature: The temperature recorded at the maximum depth, p. Safety factor setting: The safety factor setting when dive was made q. Average depth: The average depth of the dive, r. Maximum depth: The deepest depth reached during the dive Recorded violations (not shown) a. Decompression: If a decompression dive was made, the label will be displayed; if the decompression stop was violated, the i-ui-i label will flash. b. Fast ascent: If the ascent rate was violated, the nw/i label will flash. c. P02 violation: If you exceed the maximum operating depth for either mix, the G5B label will flash. d. Out of range: If a dive was made that exceeded the depth limit or at an altitude over 6000m/19,685 ft., the entire display will flash. |