a. Profile number: This is the sequential number of the dive in memory. b. Dive time: This is the minute display during the dive. If the profile recording was set to 30 seconds, you will see two depth readings for each minute; if set to 15 seconds, you will see four depth readings per minute. c. Depth: The depth where the sampling occurred. d. Mix: The mix setting used at that point during the dive Transfer Data Mode You can download the logbook and profile data to a personal computer using the optional PC interface kit. 1. Go into Profile Mode as explained in the previous section. 2. Press LOCK to start the Transfer Data Mode 3. At this point, you can attach the computer to the interface and upload your data to the PC. |