| | | 2. To scroll through the time/depth combinations, press SELECT to go deeper or press SET to go shallower. Note that there is a short delay between the appearance of the next depth and the display of the NDL time. 3. To exit Plan Mode, Press MODE. To switch to Plan Marine simulator, press LOCK. (Note: Plan Simulator is only available between repetitive dives with a minimum 10 minute surface interval). Plan Simulator The Plan Simulator is only available between dives, not before the first dive. Plan Simulator allows you to enter addition surface interval time to your current interval time and lets you see no-decompression times out in the future. In addition, the Plan Simulator will display the P02 for each depth. 1. While in Plan Mode, press LOCK. Surface time (a) and P02 (b) will appear (figure 10). 2. Press SELECT to add surface interval time in 30 minute increments. | | |