Catalogue 2017/2018
200Pages

{{requestButtons}}

Catalog excerpts

Catalogue 2017/2018 - 2

Mast block size 140 p. 88 Tulip foot block size 70 Outhaul slider size 280 p. 143 Asymmetric batten slider p. 163 Double slider for ring p. 163 Double slider for soft-link cover image from photo of Green Challenge Team - Kika - photo A.Carloni

Open the catalog to page 2
Catalogue 2017/2018 - 3

index winches ball bearing cars full batten systems soft link accessories J80 breschi-photo-video.com

Open the catalog to page 3
Catalogue 2017/2018 - 6

winches: technical information 30(kg) WINCH POWER AND MAXIMUM FORCE To calculate the maximum force (F), first use the tables to find winch power (P). Assuming the efficiency is 70% and the maximum force exerted on the handle is 30 kg, the maximum force obtainable will be: F = 20xP (kg) i.e. twenty times the winch power. For example, for a model with a winch power 50, the maximum force would be F = 20x50 = 1000 Kg RECOVERY SPEED The recovery speed (S) is the length of line recovered with one turn of the handle. It is the converse of the winch power (P), and can be calculated using the...

Open the catalog to page 6
Catalogue 2017/2018 - 7

winch selection guide MASTHEAD RIG LOA up to (m) WINCH POWER GENOA SHEET WINCH POWER GENOA SHEET

Open the catalog to page 7
Catalogue 2017/2018 - 8

STANDARD WINCHES \ There are three series of standard winches: one direct speed winches, small and fast models for boats up to 6-7 m. two speed winches, direct and reduced: medium size models for boats up to 9-10 m. two reduced speed winches, medium-large size models for boats up to 12-13 m. Basic model, snubbing winch without handle, completely glass-fiber resin made. ONE DIRECT SPEED WINCHES W6 - W7 - W8 Turn the handle clockwise to engage the single direct gear; the handle turns freely counterclockwise. Model W6 is the smallest and lightest in the range, with a glass-fibre resin base and...

Open the catalog to page 8
Catalogue 2017/2018 - 9

TWO SPEED WINCHES: DIRECT, REDUCED W16 - W30 - W42 The first speed is direct (one turn of the drum for each turn of the handle); the second speed is reduced: slower but more powerful. Bronze base and gears, AISI 316 stainless steel central rod and roller bearings, and black anodized aluminium (AL) or chrome-plated (CH) drums. P1,P2 : power with the first (fast) and second (slow) gear. S1,S2 : recovery speed, the length of line recovered with one turn of the handle in first gear and in second gear.

Open the catalog to page 9
Catalogue 2017/2018 - 10

XT winches simple opening vertical knurling CNC base hard black anodized aluminium (AL) 15 new self-tailing winches available in the following versions: HARD BLACK ALUMINIUM (AL): the aluminium drum is hard black anodized and teflon coated, scratch-proof and very hard-wearing (page 10-11). CHROME (CH): the drum, ST disks and ST arm are entirely chrome-plated. All chromed parts are highly polished, thickly nickel-plated and finally finished in chrome (pages 10-11). RACE (R): racing series obtained by lightening the previous series AL (page 22). CLASSIC (CHC and BNC): entirely made of chromed...

Open the catalog to page 10
Catalogue 2017/2018 - 11

Ring tool Opening: just unscrew the upper ring to immediately dismantle the winch Self-tailing arm with 14 positions Stainless steel roller bearing with nylon casing Spring loaded self-tailing plates Chromed bronze stem Hard black anodized aluminium CNC base vertical knurling Stainless steel (316) central rod-universal connection Ball bearing for vertical loads* Toothed crown gear** High strength bronze gearing Axle with low-friction PVD finishing s.steel-aluminium insulating washer Hard black anodized aluminium CNC skirt * ball bearing for vertical load: from model XT48, on smaller models...

Open the catalog to page 11
Catalogue 2017/2018 - 12

ONE REDUCED SPEED WINCH XT16 - XT30 TWO SPEED WINCHES: DIRECT, REDUCED XT16.2 - XT30.2 The two smallest models (XT16 and XT30) have a single reduced speed, giving a slow but powerful gear. The handle turns freely the other way. Both available in chrome (CH) or hard black alloy (AL). The addition of a direct speed to the above described models gives a faster recovery gear, which, combined with reduced weight and an automatic self-tailing for very thin lines, makes these models the best choice for racing. All these models (from size 40) can be powered with electric or hydraulic motors (page...

Open the catalog to page 12
Catalogue 2017/2018 - 13

TWO REDUCED SPEED WINCHES XT66 - XT70 Large drum winches for 15-18 m boats. All the gears are fitted with roller bearings and the drum works on a very wide diameter roller-ball bearings. P1, P2, P3 : power with the first (fast), second (medium) and third (slow) gear. S1, S2, S3 : recovery speed, the length of line recovered with one turn of the handle in first, second and third gear.

Open the catalog to page 13
Catalogue 2017/2018 - 14

ELECTRIC WINCHES All Antal winch models, from XT40 to XT80.3, maxi W80.3ST and W90.3ST can be fitted with an electric motor. All electric winches are available with a chromed drum, now also black aluminum drums with a reinforced crown gear (high resistance alloy or A316 s.steel) are available. HORIZONTAL AND VERTICAL MOTORS All the winches may be equipped with a horizontal motor and gearbox with a worm screw. The largest models may be supplied with a vertical motor which uses a high-efficiency hypocycloid speed reducer. Both solutions have been studied to ensure particularly compact...

Open the catalog to page 14
Catalogue 2017/2018 - 15

winch F1 screws: for fastening the winch to the flange F2 screws: for fastening the motor unit to the flange F3 screws: for fastening the flange to the deck motor unit-winch flange deck disengagement system gearbox motor unit manoeuvre that you want to perform; this allows fast recovery of the first part of the manoeuvre and more careful regulation in the final stage. In electric winches the speeds are higher than in manual use. The recovery speed, indicated in the tables, is measured without a load; in the presence of the maximum load, a speed reduction of up to 30% must be considered. All...

Open the catalog to page 15
Catalogue 2017/2018 - 16

HORIZONTAL DRIVE - MOTOR 700 W 12/24 V XT40EH - XT44EH - XT48EH The three models XT40, XT44 and XT48 are powered with a 700 Watt motor, available in 12 and 24 volt versions. Two switches, one control box and one breaker complete the system. LINE SPEED: the recovery speed is calculated with the winch not under load; at maximum load the figure should be reduced by 30%. MANUAL USE: the gearbox-motor unit is disengaged simply by inserting the handle. CIRCUIT DIAGRAM: for the circuit diagram and accessories, such as switches, control boxes and breakers, see page 17. All our electric winches are...

Open the catalog to page 16

All Antal catalogs and brochures

  1. XT 52 Race

    2 Pages

  2. HS22.40

    1 Pages

  3. 2013-Antal

    184 Pages

  4. winch 42

    1 Pages

  5. winch 30

    1 Pages

  6. winch 8

    1 Pages

  7. winch 7

    1 Pages

  8. W40ST

    2 Pages

  9. WINCH 5

    1 Pages