SS264W Twin 1kW Wide Beam Pair - 2 Pages

Add to MyNauticExpo favorites
SS264W Twin 1kW Wide Beam Pair

Catalog excerpts

2 Low-Profile Housings for Center-Consoles Airmar has taken the SS270W wide-beam thru-hull and split it into a pair of Tilted Element™ transducers. One transducer handles 50 kHz while the other operates at 200 kHz. Now you can get all of the performance of the SS270W without a fairing. The low-profile design is perfect for fast, trailered, tournament, and sportfishing boats—especially center consoles. See the ^^ider Picture This transducer pair gives you four times the beamwidth at 200 kHz than other high-performance transducers. Since the width of the beams are the same at both frequencies, a split-screen fishfinder display will clearly show the same water column and bottom coverage. Fish may also appear as arches. More fish will be marked while cruising, trolling, drifting, or at anchor. Get the wider picture on your sounder with the SS264W pair. •Tuna/Marlin Fishermen—Detect bait and gamefish in the upper water column that would go unseen with a traditional narrow-beam transducer. • Downrigger Fishermen—Have the ability to see your downrigger ball and the lines attached to it. Get a closer look at a fish strike on your echosounder screen. •Jig Fishermen—Seeing your jigs on the echosounder screen while bottom fishing can help avoid bottom hang-ups. Seeing a tuna attack your jigs on the echosounder display lets you reel up loose lines before it is too late. [flAIRMAIT IUH I TECHNOLOGY CORPORATION Tilted Element™ Pair Thru-Hull Wide-Beam Fishing Applications ■ Blue-water trolling using both 50 kHz and 200 kHz • Bait and game fish marking in shallow to mid-water • Wreck and structure fiinding on the continental shelf • Vertical deep jigging • Downrigger fishing in saltwater or deep-water lakes Features • Consists of two transducers (purchased separately): •SS264 50 kHz wide-beam •SS264 200 kHz wide-beam • Transducers must be purchased separately for dual-frequency operation or individually as a single-frequency unit • Fixed 20° tilted version for 16° to 24° hull deadrise • Fixed 12° tilted version for 8° to 15° hull deadrise • Fixed 0° tilted version for 0° to 7° hull deadrise • Provides 4 times the beamwidth at 200 kHz than other high-performance transducers • Identical wide 25° beamwidths at 50 kHz and 200 kHz • No affect on your boats running performance • Low-profile protrusion below the hull • Depth and fast-response water-temperature sensor • Boat Size: 8 m to 11 m (25' to 35')

 Open the catalog to page 1

MAXIMUM DEPTH RANGE BEAM DIAMETER VS DEPTH ’ 2OO kHz IMmg OEM ■ cable only SPECIFICATIONS Weight: 2.7 kg (6 lb) Hull Deadrise: Up to 24° Acoustic Window: Urethane DIMENSIONS (0.25")    Nut 0 97.3 mm 56 mm Directivity Patterns 50 kHz    -3 dB Beamwidth SS264W Pair wiring installation ■ The 200 kHz transducer can be added to existing B260 or M260 installations (switchbox is needed) for the ultimate 200 kHz wide and narrow-beam combination. This gives you the ability to switch 200 kHz transducers based on the type of fishing on a given day. [flAIRMAITIkllH I TECHNOLOGY CORPORATION CERTIFIED...

 Open the catalog to page 2

All Airmar catalogs and brochures

  1. B258 Thru-Hull

    2 Pages

  2. In-Hull Chirp

    6 Pages

  3. Thru Hull Chirp

    6 Pages

  4. HT200

    2 Pages

  5. G2183

    2 Pages

  6. DX900+

    4 Pages

  7. R111LM Chirp

    6 Pages

  8. PM111LH Chirp

    6 Pages

  9. M563 Chirp

    2 Pages

  10. B785M Chirp

    2 Pages

  11. DST800

    2 Pages

  12. SmallBoat CHIRP

    6 Pages

  13. SB264

    2 Pages

  14. In-Hull

    6 Pages

  15. NMEA Converters

    2 Pages

  16. Speed Sensors

    2 Pages

  17. Transom-Mounts

    2 Pages

  18. P79 In-Hull

    2 Pages

  19. B117 Thru-Hull

    2 Pages

  20. P319 Thru-Hull

    2 Pages

  21. LB150

    4 Pages

  22. PB200

    4 Pages

  23. PB150

    2 Pages