M265 LM/LH In-Hull Chirp - 6 Pages

Add to MyNauticExpo favorites
M265 LM/LH In-Hull Chirp

Catalog excerpts

P75M screenshot courtesy of Navico In-Hull Chirp Transducers As Chirp technology remains at the forefront of echo sounder ­ evelopment, d AIRMAR continues to add transducers for every installation type. When ­ erformance matters most, we’ve got you covered. p The Benefits of AIRMAR’s Chirp-ready Transducers • One broadband transducer covers up to 117 kHz of bandwidth – greater opportunities to detect fish in the water column Superior resolution – precise separation between baitfish and gamefish represented on the display with crisp images Enhanced bottom fishing – resolve targets close to the bottom or near structure/wrecks Amazing detail – recognize haloclines and thermoclines Improved signal to noise ratio – find fish and track bottom at high boat speeds

 Open the catalog to page 1

In-Hull transducers are installed inside the boat hull. The transducer is suspended in a liquid filled tank and transmits its sonar directly through a solid fiberglass hull. Some prefer this mounting style because it is not necessary to drill through the vessel's hull and it can be installed and serviced while the vessel is in the water. The transducer cannot be damaged by debris, hauling or trailering. The transducer is not exposed to marine growth, and there is no drag. And, the wide frequency band of a Chirp transducer allows you to select the best frequency for your hull's...

 Open the catalog to page 2

Features: • Depth only • Hull Type: Solid fiberglass stepped, planing or displacement hull types • Plastic / Urethane transducer housing • Hull deadrise: Up to 30° • Engine type: Can be used with single or twin inboard, I/O, OB and jet drive propulsion 4X Cap Screw (SS) 4X Lock Washer (SS) 4X Flat Washer (SS) Allen Wrench (SS) Gasket (Nitrile) Inside Tank (Plastic) Liner (Cork) Inside 221 mm (8.71") M265LH Low & High Frequency • Low—42 kHz to 65 kHz 25° to 16° beamwidth Maximum depth 3000 ft • High—130 kHz to 210 kHz 10° to 6° beamwidth Maximum depth 1000 ft • 103 kHz of total bandwidth...

 Open the catalog to page 3

Features: • Depth only • Hull Type: Solid fiberglass stepped, planing or displacement hull types DIMENSIONS • Plastic / Urethane transducer housing • Hull deadrise: Up to 30° • Engine type: Can be used with single or twin inboard, I/O, OB and jet drive propulsion R111LH Low & High Frequency • Low—38 kHz to 75 kHz 19° to 10° port-starboard 10° to 5° fore-aft beamwidth Maximum depth 6000 ft • High—130 kHz to 210 kHz 8° to 4° beamwidth Maximum depth 1500 ft • 117 kHz of total bandwidth from one transducer R111LM Low & Medium Frequency • Low—38 kHz to 75 kHz 19° to 10° port-starboard 10° to 5°...

 Open the catalog to page 4

-Hull 2-3 kW Features: • Depth only • Hull Type: Solid fiberglass stepped, planing or displacement hull types • Plastic / Urethane transducer housing • Hull deadrise: Up to 30° • Engine type: Can be used with single or twin inboard, I/O, OB and jet drive propulsion DIMENSIONS R599LH Low & High Frequency • Low—28 kHz to 60 kHz 23° to 9° port-starboard 11° to 5° fore-aft beamwidth Maximum depth 10000 ft • High—130 kHz to 210 kHz 8° to 4° beamwidth Maximum depth 1500 ft • 112 kHz of total bandwidth from one transducer R599LM Low & Medium Frequency • Low—28 kHz to 60 kHz 23° to 9°...

 Open the catalog to page 5

Additional Mounting Options Traditional sounders operate at only two discrete f ­ requencies – typically 50 kHz and 200 kHz. This results in limited depth range, resolution, and ultimately what targets can be detected in the water column. In contrast, AIRMAR’s game-changing Chirp-ready t ­ ransducers provide over 70+ kHz of bandwidth. T ­ ransmitting over a wide frequency band results in a greater ­ pportunity to detect what is in the water column. o As a result, all targets detected in the entire bandwidth will be seen on the display–even those fish holding close to the bottom–ultimately...

 Open the catalog to page 6

All Airmar catalogs and brochures

  1. B258 Thru-Hull

    2 Pages

  2. In-Hull Chirp

    6 Pages

  3. Thru Hull Chirp

    6 Pages

  4. HT200

    2 Pages

  5. G2183

    2 Pages

  6. DX900+

    4 Pages

  7. R111LM Chirp

    6 Pages

  8. PM111LH Chirp

    6 Pages

  9. M563 Chirp

    2 Pages

  10. B785M Chirp

    2 Pages

  11. DST800

    2 Pages

  12. SmallBoat CHIRP

    6 Pages

  13. SB264

    2 Pages

  14. In-Hull

    6 Pages

  15. NMEA Converters

    2 Pages

  16. Speed Sensors

    2 Pages

  17. Transom-Mounts

    2 Pages

  18. P79 In-Hull

    2 Pages

  19. B117 Thru-Hull

    2 Pages

  20. P319 Thru-Hull

    2 Pages

  21. LB150

    4 Pages

  22. PB200

    4 Pages

  23. PB150

    2 Pages