In-Hull Transducers - 2 Pages

Add to MyNauticExpo favorites
In-Hull Transducers

Catalog excerpts

In-Hull Transducers 1 kW, High-Definition Digital Broadband • Adjustable from 2° to 22° of deadrise • Epoxies to aluminum hulls under 3.8 mm (0.125”) thick • Broadband Ceramic Technology: • Crystal clear image detail and resolution • istinguishes individual fish targets and D fish tight to the bottom • 600 Watts • Depth Only • In-Hull, Plastic Housing • 50/200 kHz • Q at 50 kHz—28 Q at 200 kHz—31 • 7.6 m (25’) cable with OEM connector • Beam Width: 50 kHz—45° 200 kHz—12° • Maximum Depth Range: 50 kHz—206 m to 294 m (700’ to 1,000’) 200 kHz—118 m to 180 m (400’ to 600’) • Boat Size: Up to 8 m (25’) • 1,000 Watts • Depth Only • In-Hull, Plastic Housing • Separate ceramics for 50 kHz and 200 kHz • Q at 50 kHz—8 Q at 200 kHz—8 • 12 m (39’) cable with OEM connector • Beam Width: 50 kHz—19° 200 kHz—6° • Maximum Depth Range: 50 kHz—529 m to 735 m (1,800’ to 2,500’) 200 kHz—206 m to 294 m (700’ to 1,000’) • Boat Size: 8 m (25’) and up Tunable, Broadband Transducers for FM & CHIRP Enabled Sounders • 2,000 Watts RMS, 20 to 30 continuous Watts • Depth Only • Thru-Hull, Epoxy Housing • Operating Frequencies: LF—38 to 75 kHz HF—130 to 210 kHz • 15 m (50’) cable • Beamwidth (Adjustable): LF—11° x 17° to 6° x 11° HF—7° to 5° • Boat Size: 12 m (40’) and up • Optionally available as R199LM, low & medium-frequency (85 to 135 kHz) • 2,000 to 3,000 Watts RMS, 30 to 60 continuous Watts • Depth Only • In-Hull, Epoxy Housing • Operating Frequencies: LF—28 to 60 kHz HF—130 to 210 kHz • 15 m (50’) cable • Beamwidth (Adjustable): LF—11° x 17° to 6° x 11° HF—7° to 5° • Boat Size: 9 m (30’) and up • Optionally available as R299LM, low & medium-frequency (85 to 135 kHz) In-Hull Transducers In-Hull Transducers • Designed for all types of solid fiberglass hulled boats • Depth Only • Mounts in a tank inside the hull • Non-toxic anti-freeze (propylene glycol) is used to fill the tank • Installation and servicing can be done while the vessel is in the water • No holes to drill through the hull • Great high-speed performance up to 35 knots (40 MPH) • Hull Deadrise Angle: —0° to 22°—P79, P89, R199 —0° to 30°—M260 *The power rating is for conventional tone burst operation at 1% duty cycle. For longer duty cycle, Chirp, and FM operation and power rating for Broadband Transducers, contact Airmar.

 Open the catalog to page 1

Number of Elements and Configuration Beam Width (@-3 dB) Number of Elements and Configuration 45° BEAM DIAMETER VS DEPTH 50 kHz Pulse Power Pulse Power BEAM DIAMETER VS DEPTH ©Airmar® Technology Corporation In_Hull_PC_rJ 05/11/11 As Airmar constantly improves its products, all specifications are subject to change without notice. All Airmar products are designed to provide high levels of accuracy and reliability, however they should only be used as aids to navigation and not as a replacement for traditional navigation aids and techniques. TRIDUCER® and Xducer ID® are registered trademarks of...

 Open the catalog to page 2

All Airmar catalogs and brochures

  1. B258 Thru-Hull

    2 Pages

  2. In-Hull Chirp

    6 Pages

  3. Thru Hull Chirp

    6 Pages

  4. HT200

    2 Pages

  5. G2183

    2 Pages

  6. DX900+

    4 Pages

  7. R111LM Chirp

    6 Pages

  8. PM111LH Chirp

    6 Pages

  9. M563 Chirp

    2 Pages

  10. B785M Chirp

    2 Pages

  11. DST800

    2 Pages

  12. SmallBoat CHIRP

    6 Pages

  13. SB264

    2 Pages

  14. In-Hull

    6 Pages

  15. NMEA Converters

    2 Pages

  16. Speed Sensors

    2 Pages

  17. Transom-Mounts

    2 Pages

  18. P79 In-Hull

    2 Pages

  19. B117 Thru-Hull

    2 Pages

  20. P319 Thru-Hull

    2 Pages

  21. LB150

    4 Pages

  22. PB200

    4 Pages

  23. PB150

    2 Pages