CM270W Traditional/CW - 2 Pages

Add to MyNauticExpo favorites
CM270W Traditional/CW

Catalog excerpts

Commercial Marine & Keel-Mount Transducers CM260    CM265LH    CM599LH 1 kW • Designed for tuna and marlin fishing • Identical 25° beams at 50 kHz and 200 kHz • 4 times wider at 200 kHz than all other 1 kW transducers 1 kW • Crystal clear image detail and resolution • Distinguishes individual fish targets and fish tight to the bottom Tunable Transducers Operates at many popular commercial fishing frequencies Perfect for todays commercial sounders and next generation FM & CHIRP sounders • 1,000 Watts • Fast-response temperature sensor • Urethane Housing • Operating Frequencies: LF—50 kHz HF—200 kHz • 12 m (40’) cable • Beamwidth: LF—25° @ 50 kHz HF—25° @ 200 kHz • Maximum Depth Range: LF—400 m to 610 m (1,350’ to 2,000’) HF—100 m to 180 m (330' to 600’) • 1,000 Watts • Fast-response temperature sensor • Urethane Housing • Operating Frequencies: LF—50 kHz HF—200 kHz • 12 m (40’) cable • Beamwidth: LF—19° @ 50 kHz HF—6° @ 200 kHz • Maximum Depth Range: LF—529 m to 735 m (1,800' to 2,500') HF—206 m to 294 m (700' to 1,000') • 1,000 Watts RMS, 18 to 25 continuous Watts • Fast-response temperature sensor • Urethane Housing • Operating Frequencies: LF—42 kHz to 65 kHz HF—130 kHz to 210 kHz • 12 m (40’) cable • Beamwidth: LF—18° to 25° HF—6° to 10° • Boat Size: 12 m (40’) and up • Optionally available as CM265LM, low & medium-frequency (85 to 135 kHz) • 2,000 Watts RMS, 20 to 30 continuous Watts • Fast-response temperature sensor • Urethane Housing • Operating Frequencies: LF—38 kHz to 75 kHz HF—130 kHz to 210 kHz • 15 m (50') cable • Beamwidth: LF—11° x 17° to 6° x 11° HF—7° to 5° • Boat Size: 12 m (40’) and up • Optionally available as CM199LM, low & medium-frequency (85 to 135 kHz) Commercial Fishing Installations Sportfishing Installations www.airmar.com • Transducers can mount flush inside a conventional steel tank ■ Cable can fit into existing stuffing tube ■ Tuna, shirashu, baitfish, and dredging applications ■ 30% to 40% more efficient than Japenese commercial transducers • Q is also 3 times lower providing higher resolution and better discrimination of fish and seabed • Transducers can mount flush in the keels of larger sportfishing vessels ■ A flush installation reduces drag and delivers crystal clear imaging—even at high speeds ■ One transducer can operate at various 

 Open the catalog to page 1

Number of Elements and Configuration Number of Elements and Configuration BEAM DIAMETER VS DEPTH BEAM DIAMETER VS DEPTH ©Airmar® Technology Corporation    Commercial_Marine_PC_rL 1/05/15 As Airmar constantly improves its products, all specifications are subject to change without notice. All Airmar products are designed to provide high levels of accuracy and reliability, however they should only be used as aids to navigation and not as a replacement for traditional navigation aids and techniques. Xducer ID® is a registered trademark of Airmar Technology Corporation. Other company or product...

 Open the catalog to page 2

All Airmar catalogs and brochures

  1. B258 Thru-Hull

    2 Pages

  2. In-Hull Chirp

    6 Pages

  3. Thru Hull Chirp

    6 Pages

  4. HT200

    2 Pages

  5. G2183

    2 Pages

  6. DX900+

    4 Pages

  7. R111LM Chirp

    6 Pages

  8. PM111LH Chirp

    6 Pages

  9. M563 Chirp

    2 Pages

  10. B785M Chirp

    2 Pages

  11. DST800

    2 Pages

  12. SmallBoat CHIRP

    6 Pages

  13. SB264

    2 Pages

  14. In-Hull

    6 Pages

  15. NMEA Converters

    2 Pages

  16. Speed Sensors

    2 Pages

  17. Transom-Mounts

    2 Pages

  18. P79 In-Hull

    2 Pages

  19. B117 Thru-Hull

    2 Pages

  20. P319 Thru-Hull

    2 Pages

  21. LB150

    4 Pages

  22. PB200

    4 Pages

  23. PB150

    2 Pages