Technical details

After careful study, the ideal pressure of each bladder of the KOBRA and SKORPIO has been determined and is indicated on the boat kite. A pump equipped with a pressure gauge will enable you to obtain a precise and effective inflation. All T2, T3, T4, T5 have been designed with a "3D smooth profile": the struts are shaped with 4 fabric panels, which enables them to benefit from a section that is close to a perfect circle. The absence of segments along the struts makes it possible to respect the profile chosen as well as possible, without the disturbances created by additional seams. - Each T2, T3, T4, T5 is equipped with a "strut pocket" on the trailing edge. The "strut pocket" was designed to hold the bladder in place and to protect it. The bladder is thus protected by 11 cm more material than the length of the strut. - In order to close the "strut pocket" correctly, it should be folded towards the strut, whilst taking care to correctly position the 2 bands of Velcro one on top of the other.