• Products
  • Catalogues
  • News & Trends
  • Exhibitions

GB Remote Control - Technical Data - 2 Pages

  1. P. 1

  2. P. 2

Catalogue excerpts

Reference: A7-0107-A Technical Data Sheet Date: 20th February 2010 Page: 1 of 2 GB Remote Control MECHANICAL DESCRIPTION OVERVIEW The GB Remote Control is designed to provide individual control for Backlight brightness, OSD functionality and Signal source for up to a maximum of x7 Glass Bridge Monitors. To aid installation each Glass Bridge Monitor is equipped with two dedicated RJ45 connections marked Input & Output enabling a “Daisy Chain” to be configured between multiple Glass Bridge Monitors using standard and readily available Ethernet Patch cables. Each monitor is equipped with a Rotary SW to enable individual monitor's to be addressed (Serial ID). User controls consist of: x7 ‘BLUE’ LED indicators representing 1 to 7 Displays connected to the Remote Control. Three Pushbutton’s (Menu, Select & Power) and a Rotary Knob with integrated Pushbutton for Backlight Brightness & Signal Source/OSD Setting. The GB Remote Control has two “User Modes” - subject to the monitor RS232 interface not being used at the time e.g. ECDIS:- 1) Primary User Control (non Menu Mode): The GB Remote Control is effectively ‘In-Active” until a Glass Bridge Monitor is selected via the Select PB & indicated by designated illuminated LED (numbered 1 to 7). Once a monitor is selected the “User” turns the Rotary Knob to control Backlight Brightness output level or presses the Rotary Knob to use the integrated PB feature to change signal source. The Power PB is used to control the status of the selected Glass Bridge Monitor; ON or Standby - indicated by solid or slow ’Blinking’ Blue LED on the Monitor. Construction: Finish: Front Panel - Bonded Glass Rear Housing - Brushed Aluminium Housing: Chemically treated Aluminium Front Sealing: Waterproof NEMA 6 / IP67 Ventilation: Convection Mounting Style: Flush Console Mounting (inch): Height from surface 10 (0.4”) Rear Fixing Brackets Panel Cut-out (inch): 108 (4.25) W x 58 (2.28”) H Dimensions: Remote Housing (inch): 120 (4.72”) W x 72 (2.83”) H x 53.75 (2.12”) D Weight: Weight (kg): 0.3 Connection: Remote Control Interface: RJ45 Socket (Bottom Entry) User Controls / Indication: ‘Active’ Display + PWR Indicator’: x7 ‘BLUE’ LED + x1 ‘GREEN’ LED Pushbuttons (x3): MENU (OSD Menu). SELECT (‘Active’ Display 1 to 7). POWER (ON/Standby). Rotary Knob with Integrated PB: Rotary function:Backlight Brightness & OSD Navigation. Pushbutton function:Signal Source & OSD Sub-Menu Selection. Environmental: Operating Temperature²: 32 ~ +131°F / 0 ~ +55°C 2) Menu Mode: Select the Menu PB whilst a Glass Bridge Monitor is “Active” to enter OSD Menu. Operating Humidity: 30% ~ 95% (Non-Condensing) Storage Humidity: 10% ~ 95% (Non-Condensing) The Rotary Knob is used to navigate through Menu’s and change settings in conjunction with it’s integrated PB feature and the Menu Pushbutton. The GB Remote Control becomes “In-Active” after 30 seconds.. When the Select PB is pressed the GB Remote Control defaults to the last known “Active” Glass Bridge Monitor… (IEC 60945) Storage Temperature: -4 ~ +140°F / -20 ~ +61 °C Shock: 10g, 11msec ½ Sine Wave Vibration: +/-1mm, 2 to 13Hz:0.7g 13 to 100Hz Note 2) We DO NOT recommend routine operation @ extreme temperatures Shipping: Carton Size (cm) & Weight: 23 x 16 x 10 & 0.475 kg APPROVALS / WARRANTY Special Note: Simultaneous Backlight Brightness Control of Multiple Monitors:GB Remote Control is designed not to simultaneously control Backlight Brightness of multiple Glass Bridge Monitors. Technically the function is possible (set all monitors to the same address) in practice the results may be considered unsatisfactory and therefore can not be guaranteed especially during daylight conditions due to varying sunlight/ambient light levels throughout the Bridge/Pilothouse area. ...Aadaptiv Technologies Limited recommend individual setting of each Monitor for optimisation. AAdaptiv Technologies Barham Court, Teston, Maidstone, Kent ME18 5BZ United Kingdom T: +44 (0) 845 224 3045 F: +44 (0) 845 224 3047 AAdaptiv Technologies 401 E.Las Olas Blvd, Suite 1400 Fort Lauderdale, Florida 33301 United States of America T: +1 954 302 8675 F: +1 954 302 8680 URL: www.aadaptiv.com, Certification (Glass Bridge Monitor Series): Maritime (Compliant): IACS E10, IEC 60945, IEC 61174 (ECDIS), IEC 62388 (Radar) & ABS. Limited Warranty: Warranty Period: 2 Year ORDERING CODE Configuration: GB Remote Control: A7-0107-A AAdaptiv Technologies 41, Les Jardins du Pinet, 83350 Saint-Tropez France T: +33 (0)4 86 87 80 50 F: +33 (0)4 86 87 80 70 AAdaptiv Technologies Trondhjemsgade 4 2100 København Ø Denmark T: +45 3526 3262 F: +45 3526 3269 E-Mail: sales@aadaptiv.com Due to a policy of continuous product development Aadaptiv Technologies Limited reserves the right to change specifications and descriptions without prior notification. All trade marks acknowledged.

 Open the catalogue to page 1

Reference: A7-0107-A Technical Data Sheet Date: 20th February 2010 Page: 2 of 2 General Assembly & Dimensions AAdaptiv Technologies Barham Court, Teston, Maidstone, Kent ME18 5BZ United Kingdom T: +44 (0) 845 224 3045 F: +44 (0) 845 224 3047 AAdaptiv Technologies 401 E.Las Olas Blvd, Suite 1400 Fort Lauderdale, Florida 33301 United States of America T: +1 954 302 8675 F: +1 954 302 8680 URL: www.aadaptiv.com, AAdaptiv Technologies 41, Les Jardins du Pinet, 83350 Saint-Tropez France T: +33 (0)4 86 87 80 50 F: +33 (0)4 86 87 80 70 AAdaptiv Technologies Trondhjemsgade 4 2100 København Ø Denmark T:...

 Open the catalogue to page 2

All Aadaptiv Technologies catalogues and brochures

  1. A8-1542S-DC

    2 Pages

    En
  2. A7-1542D-DV

    2 Pages

    En
  3. Elite PCs

    2 Pages

    En